blockcontent top

Faxworld error message codes

The error codes below can occur during communication between our server and the receiving fax machine.

Error message: Explanation:
Fax sent (with delay) Fax sent with delay.
Delivery to fax engine failed Fax not sent. The fax server was unable to convert the e-mail into a fax message.
Fax not sent Fax not sent.
U : Fax called did not answer Fax not sent. The number dialled did not respond.
U : Line busy fax unsuccessful Fax not sent. The line was busy despite multiple attempts. By default, three attempts are made, allowing 5-minute intervals.
No answer from remote; too many attempts to dial Fax not sent. The number dialled did not respond.
Busy signal detected; too many attempts to dial Fax not sent. The line was busy despite multiple attempts. By default, three attempts are made, allowing 5-minute intervals.
Unknown problem (check modem power); too many attempts to dial Fax not sent. A fax did not respond. Check whether the fax number is a real fax number. You can call the number using a normal telephone to find out whether a fax machine is connected to the line.
No carrier detected Fax not sent. The receiving fax did not respond. Either no fax machine is connected to the relevant number or the receiving fax is temporarily out of service.
No carrier detected; too many attempts to dial Fax not sent. The receiving fax did not respond. Either no fax machine is connected to the relevant number or the receiving fax is temporarily out of service.
No local dialling tone; Fax not sent. There was a problem with the connection. Try to send the fax again later.
U : No dialling tone fax unable to transmit Fax not sent. There was a problem with the connection. Try to send the fax later.
Not Sent Fax not sent.
U : Unable to initialise modem for fax Fax not sent. Connection set-up with receiving fax machine was unsuccessful.
No response to MPS or EOP repeated 3 attempts; gave up after several attempts to send same page. Fax not sent. The fax machine of the recipient disconnected during multiple attempts. Contact the recipient, if required.
No answer (T.30 T1 timeout); too many attempts to send Fax not sent. The fax number dialled did not respond.
U : Error 34R.1 too many iterations Fax not sent. The quality of the line of the recipient fax was too poor, as a result of which the fax could not be delivered.
U : Error 32R.1 Fax not sent. The quality of the line of the recipient fax was too poor, as a result of which the fax could not be delivered.
No answer (T.30 T1 timeout); too many attempts to dial Fax not sent. The call was answered, but not by a fax machine.
No answer (T.30 T1 timeout) Fax not sent. The call was answered, but not by a fax machine.
Procedure interrupt (operator intervention) Fax not sent. The receiving party disconnected.
Failure to train remote modem at 2400 bps or minimum speed; Giving up after 3 attempts to send same Fax not sent. Connection set-up with receiving fax machine was unsuccessful.
U : Error 32R.3 <6 Fax not sent. The quality of the line of the recipient fax was too poor, as a result of which the fax could not be delivered.
U : Error 33R.1 too many iterations Fax not sent. The quality of the line of the recipient fax was too poor, as a result of which the fax could not be delivered.

No answer to your question?

Please contact our helpdesk colleges (during office hours) or send an email to helpdesk@fax-service.nl.

« Back to FAQ's
« Terug naar Veel gestelde Vragen
blockcontent bottom


rightcontentblock top

Do you have any questions?

Telephone: 023 - 554 67 00
Or call me back


rightcontentblock bottom